Leak-Master MAPMAX

Lekkasjedeteksjon med Wittgas Leak-Master Easy påviser selv de minste lekkasjer i pakker, uten behov for sporingsgasser. Leak-Master Easy er et vannbasert system (boble-test). Eventuelle lekkasjer er lett synlig som en strøm av bobler.


  • Økonomisk og ukomplisert
  • Visuell bekreftelse på lekkasjer
  • For alle typer pakker
  • Kort testtid, < 30 sekunder
  • Intuitiv, ingen spesialkunnskap nødvendig
  • Enkel installasjon og oppstart
  • Ingen sporingsgasser nødvendig
  • Ingen kalibrering nødvendig
  • Forskjellige kammerstørrelser
  • Lite vedlikehold
  • Enkel å rengjøre
  • Ingen strømtilførsel nødvendig
  • Ingen vakuumpumpe nødvendig


Leak-Master MAPMAX er Wittgas sitt avanserte alternativ innen «inline» lekkasjedeteksjon. Se også Wittgas Leak-Master EASY eller Wittgas PRO 2 for individuell testing av lekkasjer.

Produsents beskrivelse:

Automatic inline micro-leak detection / leak testing system for packages based on CO2.
LEAK-MASTER MAPMAX enables the non-destructive detection of the smallest leaks and seal integrity test, without the costly use of helium as a trace gas – directly after the packaging process.

CO2 is the most important gas in the packaging of food under a modified atmosphere.
The LEAK-MASTER MAPMAX uses this CO2 as trace gas. That way it is possible to test the packages for leaks directly after the packing process.

The LEAK-MASTER MAPMAX places the packages or complete shipping cases in the test chamber. If the test sample is leaking, the pressure difference will result in a gas flow from the package into the chamber and the CO2-concentration within the chamber rises. The highly sensitive sensor will pick up the changes of the CO2-concentration and thus, even smallest leaks are easily detected.

After each test cycle (up to 15 cycles per minute) the chamber is ventilated and the test sample is moved on to the following system. If a leak has been detected, several potential-free contacts for communication with external systems are available (e.g. alarms and/or pusher).

  • 100% leak testing, 100% safety
  • non-destructive detection of even the smallest of leaks
  • highly sensitive and ultra-fast CO2 sensor
  • up to 15 cycles per minute
  • directly after the packaging process
  • standardised leak testing system and documentation


  • short response time
  • high operating speed (max. 15 cycles/min.)
  • for single packages or whole shipping cases
  • various chamber sizes
  • for flexible and rigid packaging
  • no calibration required
  • easy-to-use intuitive operation – no special skills required
  • user-friendly – data and process parameter entry by means of integrated PLC with touchscreen or via remote personal computer
  • convenient data administration and evaluation for customer-oriented quality documentation
  • remote transmission of results via Ethernet
  • easy-to-clean stainless steel housing

Caution! This equipment is not suitable for the checking of packaging featuring O2 content greater than 20.9% (fresh meat, for example).